14-02-2019, 11:21 AM
The motherboard is the heart of any computer. Without one Carl Nassib Womens Jersey , a fully functional computer would be impossible. All other essential components of a computer are connected to it in order to make each part functional. To be able to understanding the components of a motherboard, it is necessary to understand the important parts included in it. Be guided with the following list of motherboard parts that can be found in a regular computer these days.
The Processor Socket
The processor socket is the place where one or more microprocessors can be installed. There are several varieties of sockets around, however in general only two are actually used. These two sockets are utilized by Intel and AMD for PGA and LGA. In the event that PGA is used the Cpu will have to have pins that go into the socket’s holes, but when LGA is used then pins will not be required because it will rest on the socket. Since the processor socket is attached to a PCB, it’s mainly designed to house the processor from other components of the motherboard. As well as its main function, the Cpu socket also serves additional important functions such as providing a structure for the processor’s support, aiding replacement, supporting the heatsink along with forming an electrical connection for the PCB and CPU.
The Memory Slots
Another term for memory slot is memory bank. It is designed for RAM modules and each RAM must be compatible with the motherboard used. On average, there are 2 to 4 memory slots and the most common ones include single and dual-channel technology. The single channel technology uses one to three RAM modules so as to operate flawlessly. Alternatively, the dual-channel technology needs to utilize more than one slot otherwise the module will lose its strength. For this reason, no less than two slots with the same kind of module, with the exact same memory capacity and also the same manufacturer should be used. To illustrate, if 1 GB memory capacity is wanted, two 512 MB modules from the same technology type and manufacturer are important for fully functional module strength.
The SATA and ATA Interface Connectors
There have been plenty of interface standards made in the past few years though the most essential two are the SATA and ATA interfaces. The ATA interface is the same as IDE. It mostly attaches hard and optical drives where 2 drives may be placed on one ribbon so as to support the majority of modern hard disk storage capabilities. However, SATA is a new interface frequently used in many computers nowadays. It’s definitely faster than ATA and it only needs one device attachment. Its wires are also thin which can result in a faster cooling process inside the computer.
Main Power Connector
The power connector is a must since it is the passageway for the power necessary for reliable motherboard performance. There are 2 different kinds of power connectors: the 20 pins + 4 pins and the 24 pins. Because of this, incompatibilities are likely because not all power supplies have the two types of main power connectors, therefore it must be significantly considered.
The Peripherals
The peripherals of the computer are bundled all together. It generally consists of nonvolatile memory chip for the system’s BIOS, a chipset forming the front side bus, peripheral buses and main memory, expanded card slot, power connectors, clock generator, sockets, main memory slot, and sound card. For newer motherboards, additional peripherals are included given that integrated circuits have low costs and sizes that can make efficient as well as cost-effective computers.
More specific motherboard parts may be learned from comprehensive manuals on understanding motherboards. Just be sure to pay full attention to each component so as to learn everything correctly.
Still in search of more details about motherboard parts and how you can pick the best motherboard to suit your needs? Find out all you need to know about motherboards at http://www.TheComputerHardwareBlog
LONDON, Sept. 14 (Xinhua) -- A huge fatberg, 250 meters long and at 130 tonnes weighs as much as 11 of London's famous double-decker buses, soon could be making its debut at the Museum of London.
The museum has confirmed Thursday it wants a slice of the enormous Whitechapel Fatberg, a monster slab of fat, wet wipes, condoms, nappies and oil, found in one of the sewers beneath the British capital.
The fatberg is blocking a stretch of a Victorian sewer beneath the Whitechapel area, measuring the length of two football pitches.
Museum of London officials are now in talks with Thames Water about having a slice of the fatberg as a future exhibit.
A spokesman at the museum said: "This rock-solid mass highlights some of the pressures modern life can impose on London's historical infrastructures. Issues like this are discussed and explored in the museum's City Now City Future season which deals with contemporary issues that cities around the world face."
Museum director Sharon Ament said: "The discovery of this fatberg highlights one of the many issues London has to deal with as it grows and evolves. Our year-long season, City Now City Future, explores what the future holds for people living in urban environments.
"It is important for the Museum of London to display genuine curiosities from past and present London. If we are able to acquire the fatberg for our collection I hope it would raise questions about how we live today and also inspire our visitors to consider solutions to the problems of growing metropolises."
The spokesman said the museum is hoping to confirm the acquisition very soon of what is one of the largest fatbergs ever discovered in Britain, and has opened a dialogue with Thames Water.
A team of eight operatives have already started to remove the fatberg using high-power water hoses to break up the m. Wholesale Jerseys Wholesale Jerseys From China Wholesale NCAA Jerseys China Wholesale NBA Jerseys Free Shipping Wholesale College Jerseys Wholesale Jerseys China Free Shipping Cheap NCAA Jerseys Online Cheap NBA Jerseys Wholesale Wholesale Authentic Soccer Jerseys Wholesale NHL Hockey Jerseys
The Processor Socket
The processor socket is the place where one or more microprocessors can be installed. There are several varieties of sockets around, however in general only two are actually used. These two sockets are utilized by Intel and AMD for PGA and LGA. In the event that PGA is used the Cpu will have to have pins that go into the socket’s holes, but when LGA is used then pins will not be required because it will rest on the socket. Since the processor socket is attached to a PCB, it’s mainly designed to house the processor from other components of the motherboard. As well as its main function, the Cpu socket also serves additional important functions such as providing a structure for the processor’s support, aiding replacement, supporting the heatsink along with forming an electrical connection for the PCB and CPU.
The Memory Slots
Another term for memory slot is memory bank. It is designed for RAM modules and each RAM must be compatible with the motherboard used. On average, there are 2 to 4 memory slots and the most common ones include single and dual-channel technology. The single channel technology uses one to three RAM modules so as to operate flawlessly. Alternatively, the dual-channel technology needs to utilize more than one slot otherwise the module will lose its strength. For this reason, no less than two slots with the same kind of module, with the exact same memory capacity and also the same manufacturer should be used. To illustrate, if 1 GB memory capacity is wanted, two 512 MB modules from the same technology type and manufacturer are important for fully functional module strength.
The SATA and ATA Interface Connectors
There have been plenty of interface standards made in the past few years though the most essential two are the SATA and ATA interfaces. The ATA interface is the same as IDE. It mostly attaches hard and optical drives where 2 drives may be placed on one ribbon so as to support the majority of modern hard disk storage capabilities. However, SATA is a new interface frequently used in many computers nowadays. It’s definitely faster than ATA and it only needs one device attachment. Its wires are also thin which can result in a faster cooling process inside the computer.
Main Power Connector
The power connector is a must since it is the passageway for the power necessary for reliable motherboard performance. There are 2 different kinds of power connectors: the 20 pins + 4 pins and the 24 pins. Because of this, incompatibilities are likely because not all power supplies have the two types of main power connectors, therefore it must be significantly considered.
The Peripherals
The peripherals of the computer are bundled all together. It generally consists of nonvolatile memory chip for the system’s BIOS, a chipset forming the front side bus, peripheral buses and main memory, expanded card slot, power connectors, clock generator, sockets, main memory slot, and sound card. For newer motherboards, additional peripherals are included given that integrated circuits have low costs and sizes that can make efficient as well as cost-effective computers.
More specific motherboard parts may be learned from comprehensive manuals on understanding motherboards. Just be sure to pay full attention to each component so as to learn everything correctly.
Still in search of more details about motherboard parts and how you can pick the best motherboard to suit your needs? Find out all you need to know about motherboards at http://www.TheComputerHardwareBlog
LONDON, Sept. 14 (Xinhua) -- A huge fatberg, 250 meters long and at 130 tonnes weighs as much as 11 of London's famous double-decker buses, soon could be making its debut at the Museum of London.
The museum has confirmed Thursday it wants a slice of the enormous Whitechapel Fatberg, a monster slab of fat, wet wipes, condoms, nappies and oil, found in one of the sewers beneath the British capital.
The fatberg is blocking a stretch of a Victorian sewer beneath the Whitechapel area, measuring the length of two football pitches.
Museum of London officials are now in talks with Thames Water about having a slice of the fatberg as a future exhibit.
A spokesman at the museum said: "This rock-solid mass highlights some of the pressures modern life can impose on London's historical infrastructures. Issues like this are discussed and explored in the museum's City Now City Future season which deals with contemporary issues that cities around the world face."
Museum director Sharon Ament said: "The discovery of this fatberg highlights one of the many issues London has to deal with as it grows and evolves. Our year-long season, City Now City Future, explores what the future holds for people living in urban environments.
"It is important for the Museum of London to display genuine curiosities from past and present London. If we are able to acquire the fatberg for our collection I hope it would raise questions about how we live today and also inspire our visitors to consider solutions to the problems of growing metropolises."
The spokesman said the museum is hoping to confirm the acquisition very soon of what is one of the largest fatbergs ever discovered in Britain, and has opened a dialogue with Thames Water.
A team of eight operatives have already started to remove the fatberg using high-power water hoses to break up the m. Wholesale Jerseys Wholesale Jerseys From China Wholesale NCAA Jerseys China Wholesale NBA Jerseys Free Shipping Wholesale College Jerseys Wholesale Jerseys China Free Shipping Cheap NCAA Jerseys Online Cheap NBA Jerseys Wholesale Wholesale Authentic Soccer Jerseys Wholesale NHL Hockey Jerseys